Q Profile
Less common than its alphabetical neighbours — chosen when a project demands something distinctive.
Engineered to a sheet
- Material
- 304 / 202 Stainless Steel
- Tolerance
- ± 0.1mm dimensional accuracy
- Standard length
- 8 ft (2440 mm) · custom on request
- Finish
- PVD coated · Champagne Gold, Rose Gold, Brushed Silver, Matte Black
- Lead time
- 6–7 working days
- Application
- Bespoke joinery · Statement details · Custom millwork
Made in our Rajkot facility
Profiles photographed in production — Champagne Gold PVD finish shown. All eight finishes available on request.
Standard sizes — and bespoke on request
Pick from our stocked size chart, or specify your own dimensions. Most custom runs ship in 6–7 working days.
| Dimensions | Thickness | Length | Variant |
|---|---|---|---|
| 10 mm | 0.8 / 1.2 mm | 8 ft / 10 ft | All variants |
| 12 mm | 0.8 / 1.2 mm | 8 ft / 10 ft | All variants |
| 15 mm | 1.2 mm | 8 ft / 10 ft | All variants |
Need a size, length or thickness outside this chart? Send us a drawing — we'll come back with a quote within one business day.
Choose your finish
Every Q Profile — across every variant and size — is available in four PVD-coated finishes.
Champagne Gold
PVD · 01Rose Gold
PVD · 02Brushed Silver
PVD · 03Matte Black
PVD · 04From bespoke joinery to custom furniture
Specified by architects and interior designers across India and beyond.
Bespoke Joinery
One-off cabinet faces and statement millwork.
Feature Walls
Architectural feature walls and showroom installations.
Custom Furniture
Designer collaborations and limited-run furniture pieces.
Built to install fast — built to last
Installation
Most Tattvarth profiles are mechanically fixed or set in a quality construction adhesive — typically MS Polymer or PU. Always pre-clean the substrate, dry-fit before final fix, and protect the visible face with the supplied film until project handover.
- Mitre cuts at 45° for clean inside and outside corners.
- Use a fine-tooth metal blade or chop saw with a stainless-rated wheel.
- Leave the protective film on until surrounding finishes are complete.
Maintenance
Our PVD coating is colourfast and scratch-resistant under normal indoor architectural use. Routine cleaning is straightforward — and there is no special chemistry required.
- Wipe with a soft microfibre cloth and warm water.
- For stubborn marks, use a mild pH-neutral detergent.
- Always wipe in the direction of the brush grain on Brushed Silver.
Do
- Pre-cut to the architect's spec to minimise on-site offcut waste.
- Mask adjoining surfaces during construction adhesive application.
- Use stainless-compatible fixings to prevent galvanic reactions.
- Remove the protective film slowly, parallel to the profile.
- Store horizontally on a flat surface before installation.
Don't
- Use steel wool, abrasive pads or harsh scouring powders on the finish.
- Clean with bleach, chlorine or muriatic acid — they will attack the PVD.
- Bend or hammer the profile cold — use a proper press brake or bending jig.
- Install in continuously wet exterior conditions without a project review.
- Store outdoors or in damp packaging — the protective film traps moisture.
Q Profile — answered
Which finishes are available?
Can I order custom sizes or lengths?
What is the typical lead time?
What is the warranty on the PVD coating?
Do you ship across India and internationally?
Get a tailored quote.
Tell us about your project — finish, length, quantity. We'll respond within one business day.