U Profile
A channel profile that defines the modern reveal — shadow gaps, clean edges, architectural drama.
Engineered to a sheet
- Material
- 304 / 202 Stainless Steel
- Tolerance
- ± 0.1mm dimensional accuracy
- Standard length
- 8 ft (2440 mm) · custom on request
- Finish
- PVD coated · Champagne Gold, Rose Gold, Brushed Silver, Matte Black
- Lead time
- 6–7 working days
- Application
- Shadow gaps · Reveals · Channel detailing
Made in our Rajkot facility
Profiles photographed in production — Champagne Gold PVD finish shown. All eight finishes available on request.
Standard sizes — and bespoke on request
Pick from our stocked size chart, or specify your own dimensions. Most custom runs ship in 6–7 working days.
| Dimensions | Thickness | Length | Variant |
|---|---|---|---|
| 5 × 5 × 5 mm | 0.8 mm | 8 ft / 10 ft | U-S |
| 8 × 8 × 8 mm | 0.8 mm | 8 ft / 10 ft | U-S |
| 10 × 10 × 10 mm | 0.8 / 1.2 mm | 8 ft / 10 ft | All variants |
| 10 × 12 × 10 mm | 0.8 / 1.2 mm | 8 ft / 10 ft | U-T |
| 12 × 12 × 12 mm | 1.2 mm | 8 ft / 10 ft | U-S, U-W |
| 10 × 20 × 10 mm | 1.2 mm | 10 ft | U-T, U-W |
Need a size, length or thickness outside this chart? Send us a drawing — we'll come back with a quote within one business day.
Choose your finish
Every U Profile — across every variant and size — is available in four PVD-coated finishes.
Champagne Gold
PVD · 01Rose Gold
PVD · 02Brushed Silver
PVD · 03Matte Black
PVD · 04From shadow gaps to tile trim
Specified by architects and interior designers across India and beyond.
Shadow Gaps
The defining detail of contemporary architectural interiors.
Glass Edges
Captive housings for back-painted glass, mirrors and shower screens.
Cabinet Edges
Drawer fronts, cabinet faces and shelving edge protection.
Tile Trim
Edge protection where tiled surfaces meet a different finish.
Built to install fast — built to last
Installation
Most Tattvarth profiles are mechanically fixed or set in a quality construction adhesive — typically MS Polymer or PU. Always pre-clean the substrate, dry-fit before final fix, and protect the visible face with the supplied film until project handover.
- Mitre cuts at 45° for clean inside and outside corners.
- Use a fine-tooth metal blade or chop saw with a stainless-rated wheel.
- Leave the protective film on until surrounding finishes are complete.
Maintenance
Our PVD coating is colourfast and scratch-resistant under normal indoor architectural use. Routine cleaning is straightforward — and there is no special chemistry required.
- Wipe with a soft microfibre cloth and warm water.
- For stubborn marks, use a mild pH-neutral detergent.
- Always wipe in the direction of the brush grain on Brushed Silver.
Do
- Pre-cut to the architect's spec to minimise on-site offcut waste.
- Mask adjoining surfaces during construction adhesive application.
- Use stainless-compatible fixings to prevent galvanic reactions.
- Remove the protective film slowly, parallel to the profile.
- Store horizontally on a flat surface before installation.
Don't
- Use steel wool, abrasive pads or harsh scouring powders on the finish.
- Clean with bleach, chlorine or muriatic acid — they will attack the PVD.
- Bend or hammer the profile cold — use a proper press brake or bending jig.
- Install in continuously wet exterior conditions without a project review.
- Store outdoors or in damp packaging — the protective film traps moisture.
U Profile — answered
Which finishes are available?
Can I order custom sizes or lengths?
What is the typical lead time?
What is the warranty on the PVD coating?
Do you ship across India and internationally?
Get a tailored quote.
Tell us about your project — finish, length, quantity. We'll respond within one business day.